Zinc-Aluminium

Application

• The best temperature for aerosol application is 15÷25°C.
• Clean the surface from rust and dirt; allow to dry.
• Before use, shake the aerosol for 2 – 3 minutes and try the spray on a cardboard box.
• When painting, hold the aerosol at a distance of 25÷30 centimeters from the painted surface.
• Apply several thin coats. Shake the aerosol again before applying each successive layer.
• After finishing the application, it is recommended to set the aerosol with the valve down and press the button releasing the content for about 5 seconds – this will improve the product reuse and preserve its existing properties, as well as protect the nozzle from possible clogging.

Note: for safety purposes, always follow the data on the Material Safety Data Sheet for the product.

Coverage: 2-3 coats ( depending on the thickness of the layer).
Recommended film thickness: about 75 μm wet, 15-20 μm dry.

Drying times at room temperature*:
– dust dry: after approx. 10 minutes
– touch dry: after approx. 30 minutes
– total dryness: after about 24 hours

* drying time depends on temperature, humidity and thickness of the coating.