Etch Primer 1K

Etch Primer in spray

Variants

Color Art. No.CapacityQuantity per carton
grey300010291400 ml 12

Gloss grade

matt
Etch Primer 1K

Technical documentation

Description

One-component primer in aerosol with excellent adhesion, recommended as the first coat applied directly to metal (iron, steel, aluminium). The product is also suitable for application on polyester putties. Thanks to the content of zinc phosphate, the primer has very good anti-corrosion properties. It can be over painted with a wide range of other paints as alkyd, cellulose or epoxy based coatings.

Note: Due to the large number of paint types on the market, it is recommended to perform test spray.

Substrates

As the first coat applied directly to metal (iron, steel, aluminium). Also suitable for application on polyester putties.

Application process

  • Informacja
  • Substrate and surface preparation
    • For best results, apply at room temperature.
    • The ambient temperature and the temperature of the applied product should be similar.
    • Surface must be dry, clean, free from dirt, rust, grease etc.
  • Informacja
  • Application
    • Before use, shake the container for approx. 2 – 3 minutes and test the spray on the cardboard.
    • Apply from a distance of approx. 25 cm.
    • Apply one or two coats as needed.
    • Sand the layer lightly for the best adhesion of the next layer.
    • After use, to clean the nozzle and prevent blockage, hold the can upside down and spray until only gas is released.

    Caution: For safety reasons always comply with information provided in the Material Safety Data Sheet.

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top