Black Mat/Black Gloss/White Gloss

Acrylic lacquer black matt / black gloss / white gloss

Variants

ColourArt. No.CapacityQuantity per carton
black mat 300002303400 ml12
black gloss300002305400 ml12
white gloss300002296400 ml12

Gloss grade

glossy / matte
Black Mat/Black Gloss/White Gloss

Technical documentation

Description

A fast-drying lacquer with good covering properties, designed for painting metal, aluminum, glass, wood, stone and plastic surfaces. Resistant to scratches, weather conditions, UV radiation and chemicals, including gasoline.

The spray lacquer provides even coverage of the surface, prevents streaks, runs and other texture defects. It works well for minor touch-ups where the original car paint has been damaged. It prevents further damage to the coating and minimizes the visibility of damage.

Substrates

It can be applied directly to metal (except stainless steel), wood, concrete, brick. The surface to be coated should be clean, dry and degreased. Splashes of old varnish and rust should be removed beforehand and the surface sanded.

Good surface preparation is necessary to achieve the best repair results.

Application process

  • Informacja
  • Surface substrate and preparation

    The surface to be coated should be clean, dry and degreased.
    Splashes of old varnish and rust should be removed beforehand and the surface sanded down.

  • Informacja
  • Application
    • The best temperature for the application of the spray is 15 ÷ 25°C.
    • Before use, shake the container about 2 – 3 minutes and try the spray on a cardboard box.
    • Keep the aerosol at a distance of 25 ÷ 30 cm from the painted surface when painting.
    • Apply the varnish in several thin layers at intervals of no more than 5 ÷ 10 minutes. Shake the aerosol again before applying each layer.
    • It is recommended to set the aerosol with the valve down and press the button releasing the contents for about 5 seconds after finishing the application – this will improve the re-use of the product and preserve its existing properties, as well as protect the nozzle from possible clogging.

    Note: For safety purposes, always follow the data on the Material Safety Data Sheet for the product.

    Drying times (at 20°C)*:

    • dust dry: after about 5 – 10 minutes
    • touch dry: after about 30 – 60 minutes
    • full dryness: after about 24 hours

    *Drying time depends on temperature, humidity and coating thickness.

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top