Ultra Light

Ultra lightweight filling polyester putty

Variants

Colour	Art. No.	Capacity	Quantity per carton
green	16511	1 l	10

Gloss grade

matt

New

Technical documentation

Description

Ultra lightweight filling polyester putty designed for car body repairs. Suitable for the application on large areas where reduced weight is important. The product features exceptional ease of sanding and excellent adhesion to metal.

Advantages

Exceptionally easy to sand.
Ideal for application on large surfaces.
Excellent adhesion to metal.
Easy mixing and application process.

Substrates

The product has very good adhesion to various surfaces. It can be applied over:

Bare steel and aluminum after flatting and degreasing.
Zinc coated steel after flatting and degreasing.
Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers, existing coatings in good condition.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

degrease
Mixing ratio by weight
100 : 2
Pot life
4 ÷ 6 min. / 20°C
Hardening time
20 ÷ 30 min. / 20°C
P100 ÷ P180
P180 ÷ P280

Use
Very lightweight polyester putty for car body repairs.

Mixing ratio by weight
Putty: 100
Hardener: 2
Stir thoroughly until achieving homogenous paste. Be careful not to create air inclusions.

Layer thickness
Putty can be applied in several thin coats. After each of them the product should be cured. Do not extend thickness of 3 mm.
Pot life is 4÷6 minutes at 20°C.

Hardening time
20÷30 minutes at 20°C
Temperature below 20°C significantly increases the hardening time.

Sanding
Coarse sanding (dry): P100÷P180.
Finishing sanding (dry): P180÷P280.

IR Drying
5÷7 minutes of short waves, depending on the layer thickness and the type of radiator.
Do not exceed the temperature of 60°C.
Use as recommended by the equipment manufacturer.
Caution: Wait about 5 minutes before the IR drying process.

Further work
Polyester putties can be over coated with:
- 2K polyester putties
- 2K polyester spray putties
- 2K acrylic primers
- 2K epoxy primers

General notes
- Excessive amount of hardener will cause problems with bleaching of the basecoat/topcoat!
- When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
- The rooms should be well ventilated.
- Clean the guns and equipment immediately after use.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.