Black Carbon

Construction putty with carbon fiber

Variants

Colour	Art. No.	Capacity	Quantity per carton
black	2106	1 kg	10
black	1162	1,7 kg	10

Gloss grade

matt

Technical documentation

Video

Description

High quality carbon fibre reinforced polyester putty for car repairs. It is recommended for filling large dents and holes in vehicles, caravans and trailers. Shows very good adhesion to different types of substrates, including plastic. Thanks to conductive properties might be applied also on elements exposed to high temperatures.

Advantages

Perfect adhesion to metals and plastic.
High flexibility and resistance.
Very good sanding properties.
Good conductive properties.

Substrates

The product has very good adhesion to various substrates. It can be applied over:

Steel and aluminum after flatting and degreasing.
Zinc coated steel after flatting and degreasing.
Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition.

We recommend sandpaper with gradations: P80÷P120.

Caution: Do not apply the putty directly on the wash primers, 1K acrylic and nitrocellulose products.

Important informations

degrease
Mixing ratio by weight
100 : 2
Pot life
3 ÷ 4 min. / 20°C
Hardening time
20 ÷ 30 min. / 20°C
P80 ÷ P120
P120 ÷ P320

Use
Carbon fibre reinforced polyester putty for car repairs.

Mixing ratio by weight
Putty: 100
Hardener: 2
Stir thoroughly until achieving homogenous paste to not create air inclusions.

Layer thickness
Putty can be applied in several thin coats. After each of them the product should dry through. Do not exceed the thickness of 3mm.
Pot life is 3÷4 minutes at 20°C

Hardening time
20÷30 minutes at 20°C.
Temperature below 20°C significantly increases the hardening time.

Sanding
Coarse sanding (dry): P80÷P120,
Finishing sanding (dry): P120÷P320.

Further work
Polyester putties can be over coated with:
- 2K polyester putties.
- 2K polyester spray fillers

General notes
- Excessive amounts of hardener will cause problems with bleaching of the topcoat!
- The rooms should be well ventilated.
- Tools should be washed directly after application.
- Use the personal protection equipment during the 2K products application. Protect
  the eyes and the respiratory system
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.