Bumper Paint

Structural paint for bumpers

Variants

Colour Art. No.Capacity Quantity per carton
black6961 0,8 l6

Gloss grade

matt
Bumper Paint

Technical documentation

Description

High-quality 1K thermoplastic topcoat with a special effect. Recommended for final painting of car parts made of plastic, such as bumpers, boards, mirrors. It allows to obtain a finegrained structure imitating plastic, covering minor defects of the substrate.

  • Extremely short curing time.
  • Very good coverage.
  • Highly scratch resistant.
  • Very good adhesion to plastic primer.

Substrates

It is designed to be applied on surfaces made of various kinds of plastic, especially polypropylene, PP, and its variables.

Note: Surface needs to be degreased and primed with Plastic Primer 1K before the paint application.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Proporcje mieszania

    Mixing ratio
    1 : 50÷60%

  • Lepkość natryskowa

    Spraying viscosity
    17 ÷ 18s / 20°C

  • Liczba warstw

    1÷2 layer
    HVLP / RP
    ø1,3 ÷ 1,4 mm

  • Czas odparowania

    between layers
    5 ÷ 10 min

  • Czas utwardzania

    Hardening time
    2 h / 20°C

Application process

  • Zastosowanie
  • Use

    For car repairs as a top coat imitating bumper structure.

  • Lepkość natryskowa
  • Spraying viscosity

    Approx. 17÷18 seconds at 20°C/DIN4

  • Liczba warstw
  • Number of layers

    1÷2 layers;

    RP gun parameters:
    Nozzle: 1.3÷1.4 mm; Pressure of input: 2.0÷2.2 bars.
    HVLP gun parameters:
    Nozzle: 1.3÷1.4 mm; Inlet pressure: 2.0 bars.

    Pressure – as recommended by the equipment manufacturer.

  • Czas odparowania
  • Evaporation time

    Between layers: 5÷10 minutes

    Evaporation time depends on the temperature and the number of layers.

  • Czas utwardzania
  • Hardening time

    Dust free: approx. 15 minutes at 20°C.
    Final dryness: approx. 2 h at 20°C.

    Temperature below 20°C significantly increases the hardening time.

  • Informacja
  • General notes
    • The best repair results can be achieved at room temperature. The temperature in the body shop and the temperature of the product should be similar.
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
    • The rooms should be well ventilated.
    • Clean the guns and equipment immediately after use.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top