MS 2:1

Acrylic clearcoat

Variants

ColourArt. No.Capacity Quantity per carton
transparent101581 l6
transparent83935 l4
Hardener for clearcoat
standard10159 0,5 l6
standard83952,5 l4
fast154080,5 l6
fast92472,5 l4
slow154090,5 l6
slow154102,5 l4

Gloss grade

high gloss
MS 2:1

Technical documentation

Weight/Volume Calculator

mlg
Varnish
Hardener:00
Total of mixture00
Minimum thinner0%00
Total of mixture00
Maximum thinner0%00
Total of mixture00
Thinner value %00
Warning: Value is not within the tolerance given by the manufacturer. (Min: , Max: ).
Total of mixture00

Video

Description

High quality bicomponent acrylic clearcoat with high gloss and increased resistance SR (Scratch Resistant). Designed for quick spot repairs and complete car body painting.

 Efficiency: 1 liter of mixture is enough to cover 8 m2 with a dry layer with thickness of 50 μm

Advantages

  • Very good flow.
  • High gloss.
  • Hard and durable coating.
  • High Scratch resistance.
  • Universal use.

Substrates

MS Acryl Clearcoat 2:1 can be applied over:

  • Base coats,
  • Old finishes in good condition after matting and degreasing.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Proporcje mieszania

    Mixing ratio
    2 : 1

  • Lepkość natryskowa

    Spraying viscosity
    15 ÷ 17 s / 20°C

  • Żywotność mieszanki

    Pot life
    5 h / 20°C

  • Liczba warstw

    2 full layers
    HVLP / RP
    ø1,3 ÷ 1,4 mm

  • Czas odparowania

    between layers
    approx. 5 min.

  • Czas odparowania

    before baking
    approx. 10 min.

  • Czas utwardzania

    Hardening time
    30 min. / 60°C

  • Suszenie promieniem IR

    15÷20 min.

Application process

  • Zastosowanie
  • Use

    For car body repairs that require a durable finish.

  • Proporcje mieszania
  • Mixing ratio by volume

    Clearcoat: 2
    Hardener: 1
    This clearcoat does not require thinner!

  • Lepkość natryskowa
  • Spraying viscosity

    15÷17 seconds at 20°C.

  • Żywotność mieszanki
  • Pot life

    Approx. 5 hours at 20°C.

  • Liczba warstw
  • Number of layers

    2 full coats, 50÷70 µm of dry film for each layer

    RP gun Parameters
    Nozzle: 1.3÷1.4 mm; Pressure: 2,0÷2,2 bar.
    HVLP gun Parameters
    Nozzle: 1.3÷1.4 mm; Pressure inside the nozzle: 2,0 bar.

  • Czas odparowania
  • Evaporation time

    Between layers: 5÷10 minutes
    Before baking: approx. 10 minutes

  • Czas utwardzania
  • Hardening time

    Hardening time at 20°C
    Dust free: after about 35-40 minutes.
    Ready to polish: after drying overnight.

    At panel temperature of 60°C
    Clearcoat is ready to polish after about 30 minutes of baking and cooling down (about 2 hours).

    Temperatures below 20°C significantly increases the drying time.

  • Suszenie promieniem IR
  • IR Drying

    15÷20 minutes of short waves, depends from the type of the machine Do not exceed the temperature of 60°C. Follow the producer instructions. Wait about 10 minutes before drying with IR radiator.

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top