Turbo-T

Fast drying and finishing polyester glaze filler

Variants

Art. No.	Colour	Capacity	Quantity per carton
10186	light green	450 ml	6

Gloss grade

matt

Technical documentation

Video

Description

Top-quality, quick-drying and finishing polyester glaze filler characterized by a very easy application thanks to its “self-levelling” effect. It is designed for car body repairs – ideal for use on large surfaces, and smart fast repairs. Thanks to the use of the latest technology, the putty is distinguished by reduced shrinkage (as much as 95% compared to standard products) and a very short drying time.

Advantages

Instantly ready for sanding (the fastest on the market)
Very easy application – self-levelling effect
Low specific weight
Very easy sanding even after being fully cured
Reduced shrinkage of 95% in comparison with other standard glaze fillers
Excellent adhesion to zinc coated steel and aluminum

Substrates

The product shows very good adhesion to various surfaces. It can be applied over:

Black steel and zinc coated steel as well as aluminum after flatting and degreasing.
Sanded polyester glass fiber laminates (GFK / GRP), polyester body fillers and putties, acrylic and epoxy primers, and old paint coatings in good condition.

Caution: Do not apply body fillers directly on reactive primers, 1-component acrylic and nitrocellulose products.

Important informations

Crumple the bag several times, before use, to mix the putty and obtain a homogeneous consistency, than squeeze the putty through the hole.
degrease
Mixing proportion by weight
100 : 2
Pot life
4 ÷ 6 min. / 20°C
Drying time
16 ÷ 20 min. / 20°C
P100 ÷ P180
P180 ÷ P320

Use
Light polyester glaze filler dedicated for smart fast repairs of the car body.

Caution
Crumple the bag several times, before use, to mix the putty and obtain a homogeneous consistency, than squeeze the putty through the hole.

Mixing propotion by weight
Body Filler: 100
Hardener: 2
Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

Coating thickness
Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried.
Do not exceed a total thickness of 4 mm.
Pot life : 4÷6 min. at 20°C

Drying time
16÷20 min. at 20°C.
Temperatures below 20°C significantly increase the drying time.

Sanding
Coarse sanding (dry): P100÷P180.
Finish sanding (dry): P180÷P320.

IR drying
5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
Do not exceed maximum temperature of 60°C.
Use accordin to the instrusctions of the radiator’s manufacturer.
Wait about 5 min. before starting IR drying.

Further work
Polyester body fillers can over coated with:
- 2K polyester body fillers,
- 2K polyester spray fillers,
- 2K acrylic primers,
- 2K epoxy primers.

General notes
- Excessive amounts of hardener may cause problems with bleaching of the topcoat!
- While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
- The rooms should be well ventilated.
- Tools should be washed directly after application.
Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.