Superior Lite

Very light and fast drying polyester body filler

Variants

Art. No. Colour Capacity Quantity per carton
9405olive green3 l4

Gloss grade

matt
Superior Lite

Technical documentation

Video

Description

High-quality lightweight body filler for car body repairs. Pinhole free formula does not need to be covered with a finishing putty! It fills cavities, dents and other imperfections very well. Easy to use and create shapes. Features excellent abrasive properties and leaves a perfectly smooth surface after sanding.

Advantages

  • Ideal smooth surface.
  • Easy to use and create shapes
  • Exceptional sanding.
  • Low density.

Substrates

The product has very good adhesion to various substrates. It can be applied over:

  • Bare steel and aluminum after flatting and degreasing.
  • Zinc coated steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    6 ÷ 7 min / 20°C

  • Czas utwardzania

    Hardening time
    20 ÷ 30 min / 20°C

  • Szlifowanie

    P100 ÷ P180
    P180 ÷ P280

Application process

  • Zastosowanie
  • Use

    Lightweight polyester body filler for car repairs.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body filler: 100
    Hardener: 2

    Stir thoroughly until a homogenous paste is obtained. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Body Filler can be applied in several thin coats. After each of them the product should cure. Do not exceed the thickness of 5 mm.

    Pot life is 6÷7 minutes at 20°C

  • Czas utwardzania
  • Hardening time

    20÷30 minutes at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P100÷P180
    Finish sanding (dry): P180÷P280

  • Suszenie promieniem IR
  • IR Drying

    5÷7 minutes of short waves, depending on the layer thickness and the type of radiator. Do not exceed the temperature of 60°C. Use as recommended by the equipment manufacturer. Caution: Wait about 5 minutes before the IR drying process.

  • Informacja
  • Further work

    Polyester body fillers can be over coated with:

    • 2K polyester putties.
    • 2K polyester spray fillers.
    • 2K acrylic fillers.
    • 2K epoxy fillers.
  • Informacja
  • General notes
    • Excessive amount of hardener will cause problems with bleaching of the topcoat!
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and air ways.
    • Clean the guns and equipment immediately after use.
    • The rooms should be well ventilated.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product



    

    Related products

     

    Read more about the product on the blog

    
    See also other products
    Wyjście 
    Go to top