Gripper-T

Ultra-lightweight filling polyester body filler

Variants

Art. No.ColourCapacityQuantity per carton
16684green1l10

Gloss grade

mat
Gripper-T

Technical documentation

Video

Description

Ultra-lightweight polyester body filler with excellent adhesion to galvanized steel, bare steel and aluminium. It features outstanding filling properties and exceptionally easy sanding. Perfectly suited for repairing large surfaces.

Advantages

  • Ultra-lightweight formula – adds minimal weight, perfect for large repairs.
  • Excellent filling properties.
  • Super gripping adhesion to metal, including galvanized steel.
  • Superior sandability – effortless sanding with no clogging.
  • Easy mixing and application process.

Substrates

The product has very good adhesion to various surfaces. It can be applied over:

  • Bare steel and aluminum after flatting and degreasing.
  • Zinc coated steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers, existing coatings in good condition.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 6 min / 20°C

  • Czas utwardzania

    Hardening time
    20 ÷ 30 min / 20°C

  • Szlifowanie

    P100÷P180
    P180÷P280

Application process

  • Zastosowanie
  • Use

    Very lightweight polyester putty for car body repairs.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body filler : 100
    Hardener : 2

    Stir thoroughly until achieving homogenous paste. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Putty can be applied in several thin coats. After each of them the product should be cured. Do not extend thickness of 3 mm.

    Pot life is 4÷6 minutes at 20°C.

  • Czas utwardzania
  • Hardening time

    20÷30 minutes at 20°C.

    Temperature below 20°C significantly increases the hardening time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P100÷P180,
    Finishing sanding (dry): P180÷P280.

  • Suszenie promieniem IR
  • IR drying*

    5÷7 minutes of short waves, depending on the layer thickness and the type of radiator. Do not exceed the temperature of 60°C. Use as recommended by the equipment manufacturer.
    Caution: Wait about 5 minutes before the IR drying process.

  • Informacja
  • Further works

    Polyester putties can be over coated with:

    • 2K polyester putties,
    • 2K polyester spray putties,
    • 2K acrylic primers,
    • 2K epoxy primers.
  • Informacja
  • General notes
    • Excessive amount of hardener will cause problems with bleaching of the topcoat!
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
    • The rooms should be well ventilated.
    • Clean the guns and equipment immediately after use.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top