Bold

Super Soft Filling Polyester Putty

Variants

Art. No. Colour Capacity Quantity per box
6671light beige500 ml10
5197light beige1000 ml10
8017 light beige3 l4

Gloss grade

matt
Bold

Technical documentation

Video

Description

Highest quality soft sanding polyester putty for car repairs – the latest technology in putties.

Advantages

  • Easy to apply with no drag and sag
  • Extremely short hardening time
  • Shows minimal surface tack
  • Excellent sanding properties

Substrates

The product has very good adhesion to various substrates. It can be applied over:

  • Bare steel and aluminum after flatting and degreasing.
  • Zinc coated, galvanized steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 6 min. / 20°C

  • Czas utwardzania

    Hardening time
    20 ÷ 30 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P280

Application process

  • Zastosowanie
  • Use

    Soft sanding polyester putty for quick car repairs.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body Filler: 100
    Hardener: 2

    Stir thoroughly until achieving homogenous paste. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Putty can be applied in several thin coats. After each of them the product
    should cure. Do to exceed the thickness of 5 mm.

    Pot life 4 ÷ 6 min. at 20°C

  • Czas utwardzania
  • Hardening time

    20÷30 min. at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120.
    Finish sanding (dry): P120÷P280.

  • Suszenie promieniem IR
  • IR drying

    5÷7 minutes of short waves, depending on the layer thickness and the type of radiator.
    Do not exceed the temperature of 60oC. Use as recommended by the equipment manufacturer.

    Caution: Wait about 5 minutes before the IR drying process drying.

  • Informacja
  • Further work

    Polyester putties can be over coated with:

    • 2K polyester putties.
    • 2K polyester spray putties.
    • 2K acrylic primers.
    • 2K epoxy primers.
  • Informacja
  • General notes
    • Excessive amount of hardener will cause problems with bleaching of the topcoat!
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
    • Clean the guns and equipment immediately after use.
    • The rooms should be well ventilated.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product



    

    Related products

    

    Check product tips

    

    Read more about the product on the blog

    
    See also other products
    Wyjście 
    Go to top