Black Carbon

Structural and conductive polyester body filler reinforced with carbon and glass fibers

Variants

Art. No.	Colour	Capacity	Quantity per carton
1736	black	500 ml	10
2369	black	1000 ml	10

Gloss grade

matt

Technical documentation

Video

Description

High quality polyester body filler reinforced with carbon and glass fiber dedicated for car body repair. Features conductive properties allowing the application on elements exposed to high temperatures. It is characterized by its high strength and increased flexibility compared to other standard structural glass fiber body fillers. Suitable for application on both metal and plastic elements.

Advantages

High strengh and exceptional flexibility
Excellent adhesion to metal (inluding zinc-coated steel and aluminum) and plastic
Good conductive properties
Good sanding quality

Substrates

Product shows very good adhesion to different substrates. It can be applied on:

Steel and aluminum after matting and degreasing
Zinc-coated steel after matting and degreasing
Sanded glass fibre-polyester laminates (GFK/GRP), polyester body fillers and putties, acrylic and epoxy primers, old paint coatings in good condition.
Plastic (with exception of PP and PE)

Caution: Do not apply body fillers directly on reactive primers, 1-component acrylic and nitrocellulose products.

Important informations

degrease
Mixing ratio by weight
100 : 2
Pot life
3 ÷ 6 min. / 20°C
Hardening time
20 ÷ 30 min. / 20°C
P80 ÷ P120
P120 ÷ P240

Use
Polyester body filler reinforced with carbon fiber intended for quick car repairs, especially on elements made of plastic. Recommended for repairing large dents and perforations.

Mixing ratio by weight
Body Filler: 100
Hardener: 2
Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

Coating thickness
Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.
Pot life 3÷6 min. at 20°C

Hardening time
20÷30 min. at 20°C
Temperatures below 20°C significantly increase the drying time.

Sanding
Coarse sanding (dry): P80÷P120.
Finish sanding (dry): P120÷P240.

Further work
Polyester body fillers can over coated with:
- 2K polyester body fillers,
- 2K polyester spray fillers.

General notes
- Excessive amounts of hardener may cause problems with bleaching of the topcoat!
- While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
- The rooms should be well ventilated.
- Tools should be washed directly after application.
Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.