Glass Fibre

Structural polyester body filler reinforced with glass fiber

Variants

ColourArt. No.Weight Quantity per carton
green 1173250 g12
green1211 400 g18
green 1213 600 g18
green1168 1 kg10
green 12151,7 kg10

Gloss grade

matt
Glass Fibre

Technical documentation

Video

Description

Structural polyester body filler reinforced with glass fiber, intended for filling large dents and holes in the body of vehicles, trailers and semi-trailers. Particularly useful in repairing elements weakened by corrosion.

Advantages

  • Very good adhesion to metal.
  • Excellent mechanical strength.
  • High elasticity.
  • Good sanding properties.

Substrates

The product has very good adhesion to various surfaces. It can be applied over:

  • Steel and aluminum after flatting and degreasing.
  • Zinc coated steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers.
  • Well sanded old or factory top coats.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 7 min. / 20°C

  • Czas utwardzania

    Drying time
    20 ÷ 30 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P320

Application process

  • Zastosowanie
  • Use

    Structural polyester body filler, especially recommended for filling large dents and holes in the car body.

  • Mieszanie wg wagi
  • Mixing ratio per weight

    Body filler: 100
    Hardener: 2

    Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 5 mm.

    Pot life 4÷7 min. at 20°C

  • Czas utwardzania
  • Drying time

    20÷30 min. at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120.
    Final sanding (dry): P120÷P320.

  • Informacja
  • Further work

    Polyester body fillers can over coated with:

    • 2K polyester body fillers,
    • 2K polyester spray fillers.
  • Informacja
  • General notes
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Ask about this product



    

    Related products

     

    Read more about the product on the blog

    
    See also other products
    Wyjście 
    Go to top