Bumper Paint

Bumper Paint

Variants

ColourArt. No. Capacity Quantity per carton
black69540,8 l6
black no structure116240,8 l6
black no structure gloss129300,8 l6

Gloss grade

matt
Bumper Paint

Technical documentation

Video

Description

High quality 1K thermoplastic topcoat with structure. Recommended for final painting of plastic car body elements, such as bumpers, moldings, mirrors.Features a fine-grained structure that imitates plastic and conceals minor defects of the substrate.

Advantages

  • Extremely short drying time.
  • Very good coverage.
  • Highly scratch resistant.
  • Very good adhesion to plastic primer.

Substrates

Designed for application on substrates made of various types of plastics, especially polypropylene, PP and its mixtures.

Before application, it is recommended to heat the plastic panels to 50°C, which helps to remove silicone from the surface.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Proporcje mieszania

    Mixing ratio
    1 + 50 ÷ 60%

  • Lepkość natryskowa

    Spraying viscosity
    17 ÷ 18s / 20°C

  • Liczba warstw

    1÷2 layers
    HVLP / RP
    ø1,3 ÷ 1,4 mm

  • Czas odparowania

    between layers
    5 ÷ 10 min.

  • Czas utwardzania

    Hardening time
    2 h / 20°C

Application process

  • Zastosowanie
  • Use

    For car repairs as a top coat imitating bumper structure.

  • Lepkość natryskowa
  • Spraying viscosity

    Approx. 17÷18 seconds at 20°C/DIN4

  • Liczba warstw
  • Number of layers

    1÷2 layers;
    RP gun parameters:
    Nozzle: 1.3÷1.4 mm; Pressure of input: 2.0÷2.2 bars.
    HVLP gun parameters:
    Nozzle: 1.3÷1.4 mm; Inlet pressure: 2.0 bars.
    Pressure – as recommended by the equipment manufacturer.

  • Czas odparowania
  • Evaporation time

    Between layers: 5÷10 minutes

    Evaporation time depends on the temperature and the number of layers.

  • Czas utwardzania
  • Hardening time

    Dust free: approx. 15 minutes at 20°C.
    Final dryness: approx. 2 h at 20°C.

    Temperature below 20°C significantly increases the hardening time.

  • Informacja
  • General notes
    • The best repair results can be achieved at room temperature. The temperature in the body shop and the temperature of the
      product should be similar.
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory
      system.
    • The rooms should be well ventilated.
    • Clean the guns and equipment immediately after use.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top