For Wood

Polyester putty

Variants

ColourArt. No.CapacityQuantity per carton
natural15841400g12
black15846400g12
brown beige15847400g12
white15848400g12
pale brown15849400g12

Gloss grade

matt
For Wood
New

Technical documentation

Description

2K filling polyester putty designed for use on wooden and wood-based elements.

Advantages

  • Very good adhesion to various types of wood.
  • Very good adhesion to wood-based materials (e.g.: plywood, OSB board, chipboard).
  • Easy mixing and application process.
  • Good sanding quality.

Substrates

The product has very good adhesion to various substrates. It can be applied over:

  • Dry and contamination-free wood after flatting and degreasing.
  • Wood from trees containing substances that hinder adhesion (fir, larch, coniferous trees, exotic trees, birch, teak, rosewood, oak and chestnut). Requires wiping with a suitable solvent, or repainting with a 2-component insulating primer (epoxy or polyurethane).
  • Wood-based materials (e.g.: plywood, OSB board, MFP board, chipboard) after flatting and degreasing.
  • Steel and aluminum after flatting and degreasing.
  • Galvanized steel after flatting and degreasing.
  • Sanded polyester-glass laminates (GFK/GRP), polyester putties, acrylic and epoxy primers and old coatings in good condition.

We recommend sandpaper with gradations: P80÷P120.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    5÷6 min. / 20°C

  • Czas utwardzania

    Hardening time
    45 min. / 20°C

  • Szlifowanie

    P80÷P120
    P120÷P240

Application process

  • Zastosowanie
  • Use

    A soft-to-work polyester putty designed for repairing wood and wood-based components.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Putty: 100
    Hardener : 2

    Stir thoroughly until achieving an uniform mixture. Stir carefully so as not to air the body filler.

  • Czas życia
  • Layer thickness

    Putty can be applied in several thin coats. After each of them the product should be cured. Do not exceed the thickness of 5 mm.

    Pot life is 5÷6 minutes at 20°C.

  • Czas utwardzania
  • Hardening time

    45 minutes at 20°C

    Temperature below 20°C significantly increases the hardening time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120.
    Finishing sanding (dry): P120÷P240.

  • Informacja
  • Further work

    Polyester putty FOR WOOD can be over coated with:

    • 2K polyester putties,
    • 2K polyester spray putties,
    • 2K acrylic primers,
    • 2K epoxy primers,
    • 2K acrylic clear coats,
    • 1K polyurethane clear coats.
  • Informacja
  • General notes
    • Excessive amounts of hardener will cause problems with bleaching of the topcoat!
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
    • The rooms should be well ventilated.
    • Clean the guns and equipment immediately after use.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top