Silver

Silver acrylic lacquer

Variants

ColourArt. No.CapacityQuantity per carton
silver 300002325400 ml12

Gloss grade

high gloss
Silver

Description

Quick-drying lacquer for rims, hubcaps, small body parts of the car body, also for decorative purposes. Good adhesion to various types of substrates. Protects against corrosion and the effects of salt and water, resistant to scratches, gasoline and chemicals, UV resistant. Do not apply clearcoat.

Substrates

The product is designed to be applied to processed and untreated wooden, metal, glass, aluminum, stone surfaces and those made of various types of plastic. In the case of plastic, it is advisable, before starting varnishing work, to anneal the element at 50°C, which will facilitate the removal of silicone compounds from its surface.

The surface to be coated should be clean, dry and degreased. Splashes of old varnish and rust should be removed beforehand and the surface sanded.

Good surface preparation is essential to achieve the best repair results.

Application process

  • Informacja
  • Substrate and surface preparation

    The surface to be coated should be clean, dry and degreased. Splashes of old varnish and rust should be removed beforehand and the surface sanded. In the case of plastic, it is advisable, before starting varnishing work, to heat the element at 50°C, which will facilitate the removal of silicone compounds from its surface.

  • Informacja
  • Application
    • The best temperature for aerosol application is 15 ÷ 25°C.
    • Before use, shake the container about 2 – 3 minutes and try the spray on a cardboard box.
    • Keep the aerosol at a distance of 25 ÷ 30 cm from the painted surface when painting.
    • Apply the varnish in several thin layers at intervals of no more than 5 ÷ 10 minutes. Shake the aerosol again before applying each layer.
    • It is recommended to set the aerosol with the valve down and press the button releasing the contents for about 5 seconds after finishing the application – this will improve the re-use of the product and preserve its existing properties, as well as protect the nozzle from possible clogging.

    Note: For safety purposes, always follow the data on the Material Safety Data Sheet for the product.

    Drying times at 20°C*:

    • dust dry: after about 5 – 10 minutes
    • touch dry: after about 20 – 30 minutes
    • full dryness: after about 24 hours

    * temperatures below 20°C significantly increase the drying time.

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top