T4 Protect Liquid

Protective agent

Variants

Art. No.	Capacity	Quantity per carton
300005446	250 ml	12
300005447	500 ml	6
300005448	1 l	6

Technical documentation

Description

Brayt T4 emulsion for surface refreshment, leaves invisible protective layer against impurities. Extends the freshness of the clear coat in 40-50%, decreases impurities on the car body up to 70-80%. Product might be used to protect varnished surfaces, gelcoats and polycarbonates. T4 has also light abrasive properties what allows to remove small defects and holograms. Suitable to gelcoats and each type of clear coats (acrylic, water based, bicomponent and fabric coatings), also on ceramic scratch resistant coatings. Enhances gloss, prevents the oxidation of the varnish, protects against UV rays, acid rain, resin. To achieve high gloss without the mist and holograms, soft foam is dedicated.

Cut level 2/10
Gloss level 10/10

Advantages

Protects the surface min. for 6 months
Can work on each type of surface
Water based product
Very easy application
Contains UV filters
Dedicated to manual and mechanical work

Application

manual work
mechanical work (dual action polisher)

Recommended applicators
- BRAYT POLISHING SOFT FOAM grey
- BRAYT MICROFIBER POLISHING PAD
- BRAYT MICROFIBER FINISHING PAD

Applicaton
- Surface must be dry.
- Apply a small amount of product on the surface (it is recommended to polish small surface, partially).
- Work with light pression on the polisher with soft foam.
- Decrease the pression on the polisher to work successfully and achieve expected effect.
- Leave 30-60 min. after application to create protective layer.
- Remove the residues with microfiber cloth or by DA polisher with soft foam.
- Do not apply on unpolimerized surfaces.