Universal

High filling polyester body filler

Variants

Colour	Art. No.	Weight	Quantity per carton
yellow	1096	250 g	12
yellow	1101	450 g	18
yellow	1102	700 g	18
yellow	1060	1 kg	10
yellow	1099	1,9 kg	10
yellow	6932	3,8 kg	4
yellow	1247	4,5 kg	4

Gloss grade

matt

Technical documentation

Video

Description

High filling polyester putty recommended for repairing large and medium-sized dents and holes. It is characterized by its smooth and creamy consistency, very good filling properties and high quality finish. Universl in use, it is very easy to apply and sand. Features great adhesion to all kinds of surfaces, including galvanized steel and aluminum.

Advantages

Easy and smooth application thanks to its creamy consistency.
Good sanding properties.
Very good adhesion to metal.
High durability.

Substrates

The product has very good adhesion to various surfaces. It can be applied over:

Bare steel and aluminum after flatting and degreasing.
Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers as well as existing coatings in good condition.
Well sanded old or factory top coats.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

degrease
Mixing ratio by weight
100 : 2
Pot life
4 ÷ 6 min. / 20°C
Drying time
20÷30 min. / 20°C
P80 ÷ P120
P120 ÷ P320

Use
Polyester body filler for car body repair.

Mixing ratio by weight
Body filler: 100
Hardener: 2
Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

Layer thickness
Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.
Pot life is 4÷6 min. at 20°C

Drying time
20÷30 min. at 20°C.
Temperatures below 20°C significantly increase the drying time.

Sanding
Coarse sanding (dry): P80÷P120.
Final sanding (dry): P120÷P180.

IR drying
5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
Do not exceed maximum temperature of 60°C.
Use accordin to the instrusctions of the radiator’s manufacturer.
Wait about 5 min. before starting IR drying.

Further work
Polyester body fillers can over coated with:
- 2K polyester body fillers,
- 2K polyester spray fillers,
- 2K acrylic primers,
- 2K epoxy primers.

General notes
- Excessive amounts of hardener may cause problems with bleaching of the topcoat!
- While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
- The rooms should be well ventilated.
- Tools should be washed directly after application.
Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.