Fine

Use

Finishing Polyester putty for car body repair.

Mixing ratio by weight

Body filler: 100
Hardener: 2

Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

Layer thickness

Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 3 mm.

Pot life: 4÷7 min. at 20°C

Drying time

20÷30 min. at 20°C.

Temperatures below 20°C significantly increase the drying time.

Sanding

Coarse sanding (dry): P80÷P120.
Final sanding (dry): P120÷P180.

IR drying

5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
Do not exceed maximum temperature of 60°C.
Use accordin to the instrusctions of the radiator’s manufacturer.
Wait about 5 min. before starting IR drying.

Further work

Polyester body fillers can over coated with:

• 2K polyester body fillers,
• 2K polyester spray fillers,
• 2K acrylic primers,
• 2K epoxy primers.

General notes

• Excessive amounts of hardener may cause problems with bleaching of the topcoat!
• While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
• The rooms should be well ventilated.
• Tools should be washed directly after application.

Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.