Light

Lightweight filling polyester body filler

Variants

ColourArt. No.CapacityQuantity per carton
light green 12811 l10
light green 1280 2,5 lno box

Gloss grade

matt
Light

Video

Description

Lightweight and filling polyester putty. Features good adhesion, flexibility and easy processing. Due to its low specific weigh, it is recommended for application on large surfaces, without burdening the car body.

Advantages

  • Very good sanding properties.
  • Easy to mix and apply.
  • Low specific weight.

Substrates

The product has very good adhesion to various surfaces. It can be applied over:

  • Steel and aluminum after flatting and degreasing.
  • Zinc coated steel after flatting and degreasing.
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers.
  • Well sanded old or factory top coats.

Caution: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio
    100 : 2

  • Czas życia

    Pot life
    4 ÷ 7 min. / 20°C

  • Czas utwardzania

    Drying time
    20 ÷ 30 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P320

Application process

  • Zastosowanie
  • Use

    Recommended for the repair of large surfaces on car bodies.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body filler: 100
    Hardener: 2

    Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

  • Czas życia
  • Layer thickness

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 5 mm.

    Pot life 4÷7 min. at 20°C

  • Czas utwardzania
  • Drying time

    20÷30 min. at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120.
    Final sanding (dry): P120÷P320.

  • Suszenie promieniem IR
  • IR drying

    5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
    Do not exceed maximum temperature of 60°C.
    Use accordin to the instrusctions of the radiator’s manufacturer.
    Wait about 5 min. before starting IR drying.

  • Informacja
  • Further work

    Polyester body fillers can over coated with:

    • 2K polyester body fillers,
    • 2K polyester spray fillers,
    • 2K acrylic primers,
    • 2K epoxy primers.
  • Informacja
  • General notes
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Ask about this product



    

    Related products

      
    See also other products
    Wyjście 
    Go to top