V2018 Anticorrosive Rapid Drying HS 5:1

Fast acrylic primer

Variants

Color Art. No. Capacity Quantity per carton
grey119530,8 l + 0,16 l6
white120020,8 l + 0,16 l6
black 120030,8 l + 0,16 l6
grey 122483 l4
white 122553 l4
black 122563 l4
hardener122490,6 l4

Gloss grade

matt
V2018 Anticorrosive Rapid Drying HS 5:1

Technical documentation

Weight/Volume Calculator

mlg
Primer
Hardener:00
Total of mixture00
Minimum thinner0%00
Total of mixture00
Maximum thinner0%00
Total of mixture00
Thinner value %00
Warning: Value is not within the tolerance given by the manufacturer. (Min: , Max: ).
Total of mixture00

Video

Description

Top-quality 2K acrylic primer with anticorrosion additives and excellent adhesion to steel, aluminum, galvanized steel, polyester putties and old paint coatings. Characterized by its short drying time, the V2018 is an ideal solution for smart quick car body repairs.

High solids content (HS primer) and additives in formulation guarantee very good filling, anti-corrosion protection and exceptional finish.

Advantages

  • Express drying time (1h / 20 °C).
  • Great filling.
  • Easy to mix and apply.
  • Very good vertical stability.
  • Excellent adhesion to difficult substrates.

Substrates

V2018 acrylic primer can be applied directly on:

  • Steel and aluminum after matting and degreasing.
  • Zinc-coated steel after matting and degreasing.
  • Sanded glass fibre-polyester laminates (GFK/GRP).
  • Polyester body fillers and putties.
  • Epoxy primers.
  • Wash primers.
  • Old paint coatings in good condition after matting and degreasing.

Good surface preparation is essential to achieve the best repair results.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Proporcje mieszania

    Mixing ratio
    5 : 1 + 10%

  • Lepkość natryskowa

    Spraying viscosity
    30 ÷ 50s / 20°C

  • Żywotność mieszanki

    Pot life for the mixture
    65 min. / 20°C

  • Liczba warstw

    2÷3 layers
    HVLP / RP
    ø1,5 ÷ 2,0 mm

  • Czas odparowania

    between layers
    5 ÷ 10 min.

  • Czas odparowania

    before baking
    ~ 10 min.

  • Czas utwardzania

    Drying time
    1 h / 20°C
    10 min. / 60°C

  • Szlifowanie na sucho

    P360 ÷ P500

  • Szlifowanie na mokro

    P600 ÷ P1000

Application process

  • Zastosowanie
  • Use

    For car body repair as a filling primer.

  • Proporcje mieszania
  • Mixing proportion per volume

    Primer: 5
    Hardener: 1
    Thinner: 10%

    Stir thoroughly until obtaining a homogenous mixture.

  • Lepkość natryskowa
  • Spraying viscosity

    30÷50 seconds at 20°C

  • Żywotność mieszanki
  • Pot life for the mixture

    about 65 minutes at 20°C

  • Liczba warstw
  • Number of layers

    2÷3 layers. About 70-90 µm for each layer.

    RP gun parameyers
    Nozzle: 1,6÷2,0 mm; Pressure: 2,0-2,2 bar.
    HVLP gun parameters
    Nozzle: 1,5÷1,9 mm; Inlet pressure: 2,0 bar.

  • Czas odparowania
  • Flash off time

    Between layers: 5÷10 minutes
    Before baking: about 10 minutes

    Flash off time depends on the temperature and coating thickness.

  • Czas utwardzania
  • Drying time

    For a coating thickeness of 150÷180 µm:
    about 1 hour at 20°C.
    about 10 minutes at 60°C.

    For a coating thickeness of 180÷250 µm:
    about 2 hours at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Suszenie promieniem IR
  • IR drying

    10÷15 minutes under short wave for coating thickness of 150÷180 µm.
    Do not exceed maximum temperature of 60°C.
    Use according to the recommendations of the equipment manufacturer.
    Wait about 10 minutes before starting IR drying.

  • Szlifowanie na sucho
  • Dry sanding

    Machine sanding: P360÷P500
    Manual sanding: P280÷P320.

  • Szlifowanie na mokro
  • Wet sanding

    Machine sanding: P600÷P1000.
    Manual sanding: P800÷P1000.

  • Informacja
  • Further work

    2K acrylic primers can be directly over coated with:

    • 2K top coats.
    • 1K base coats.
  • Informacja
  • General notes
    • Do not exceed recommended doses of the hardener!
    • The best repair results can be achieved by painting at room temperature. The temperature in the body shop and the temperature of the product should be similar.
    • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and airways.
    • The rooms should be well ventilated.
    • Clean the guns and equipment immediately after use.

    Caution: To maintain safety, always follow the instructions given in the MSDS for the products.

Ask about this product



    

    Related products

    

    Check product tips

    

    Read more about the product on the blog

    
    See also other products
    Wyjście 
    Go to top