Extra

Soft high filling polyester body filler

Variants

Art. No. ColourCapacity Quantity per carton
1737beige500 ml10
2443 beige1000 ml10

Gloss grade

matt
Extra

Video

Description

High quality soft and filling polyester body filler with very easy application. It is characterized by its exceptionally creamy consistency, ideal for creating shapes. Specially recommended for filling holes in substrates with complex shapes.

Advantages

  • Creamy consistency
  • High elasticity
  • Very easy application and soft sanding
  • Perfectly smooth surface after sanding

Substrates

Product shows very good adhesion to various substrates. It can be applied on:

  • Steel and aluminum after matting and degreasing
  • Zinc coated steel after matting and degreasing
  • Sanded glass fibre-polyester laminates (GFK/GRP), polyester body fillers and putties, acrylic and epoxy primers, old paint coatings in good condition.

Caution: Do not apply body fillers directly on reactive primers, 1-component acrylic and nitrocellulose products.

Important informations

  • Przetrzeć odtłuścić

    degrease

  • Mieszanie wg wagi

    Mixing ratio by weight
    100 : 2

  • Czas życia

    Pot life
    5 ÷ 6 min. / 20°C

  • Czas utwardzania

    Hardening time
    16 ÷ 26 min. / 20°C

  • Szlifowanie

    P80 ÷ P120
    P120 ÷ P240

Application process

  • Zastosowanie
  • Use

    high filling soft sanding polyester body filler dedicated for car body repairs.

  • Mieszanie wg wagi
  • Mixing ratio by weight

    Body Filler: 100
    Hardener: 2

    Stir thoroughly until a homogenous paste is achieved. Be careful not to create air inclusions.

  • Czas życia
  • Coating thickness

    Body filler can be applied in several thin layers. Before applying each new coat wait until the latter has fully dried. Do not exceed a total thickness of 5 mm.

    Pot life 5÷6 min. at 20°C.

  • Czas utwardzania
  • Hardening time

    16÷26 min. at 20°C.

    Temperatures below 20°C significantly increase the drying time.

  • Szlifowanie
  • Sanding

    Coarse sanding (dry): P80÷P120.
    Finish sanding (dry): P120÷P240.

  • Suszenie promieniem IR
  • IR drying

    5÷7 min. under short waves, depeding on the total layer thickeness and type of radiator
    Do not exceed maximum temperature of 60°C.
    Use accordin to the instrusctions of the radiator’s manufacturer.
    Wait about 5 min. before starting IR drying.

  • Informacja
  • Further work

    Na szpachlówki poliestrowe można aplikować:

    • 2-komponentowe szpachlówki poliestrowe,
    • 2-komponentowe poliestrowe szpachlówki natryskowe.
    • 2-komponentowe podkłady akrylowe.
    • 2-komponentowe podkłady epoksydowe.
  • Informacja
  • General notes
    • Excessive amounts of hardener may cause problems with bleaching of the topcoat!
    • While working with 2K products use adequate personal protection equipment. Protect the eyes and air ways.
    • The rooms should be well ventilated.
    • Tools should be washed directly after application.

    Caution: To maintain safety, always follow the instructions given in the SDS sheets of the product.

Ask about this product



    

    Related products

    

    Check product tips

    

    Read more about the product on the blog

    
    See also other products
    Wyjście 
    Go to top